歐姆龍日本光纖放大器，OMRON光纖放大器材質說明
上海乾拓貿易有限公司
企業QQ：2880626087
；
手機；（）
郵箱；@163.com
地址：上海市嘉定區江橋嘉涌路99弄6號713室
Open-collector output (NPN or PNP) Load power supply: 26.4 V max., Load current:
50 mA max. (Residual voltage: 1.5 V max.) Light-ON/Dark-ON mode selector Response time Operate or reset:
200 μs max. Sensitivity adjustment UP/DOWN direct key setting,
teaching Protection circuits Power supply reverse polarity protection,
output short-circuit protection, output reverse polarity protection Timer function ON/OFF-delay timer:
10 ms (each fixed) Mutual interference prevention Up to 5 Amplifiers (optically synchronized)
Ambient illumination
Receiver side Incandescent lamp: 10,000 lux max. Sunlight: 20,000 lux max.
■ Immediately determine operation and amount of light with a simple, bright display.
Control output
Wire-saving connector
E3X-SD6 E3X-SD8
Amplifier Unit Connectors (Order Separately) Note: Stickers for Connectors are included as accessories.
Combining Amplifier Units and Connectors
Amplifier Units Applicable Connectors (Order Separately) Type NPN PNP + Master Connector Slave Connector
(Basically, Amplifier Units and Connectors are sold separately) Refer to the following tables when placing an order.
Standard models
E3X-SD6 E3X-SD8 E3X-CN11 (3-wire) E3X-CN12 (1-wire)
When Using 5 Amplifier Units 5 Amplifier Units + 1 Master Connector + 4 Slave Connectors
Size Cable specifications Appearance Cable type Model
Fourconductor cable
XS3F-M421-402-A 5 m XS3F-M421-405-A 2 m XS3F-M422-402-A 5 m XS3F-M422-405-A
■ General-purpose capabilities to simply handle a broad range of applications.
Ordering Information
Sensor I/O Connectors (Order Separately)
Accessories (Order Separately)
Amplifier Units Digital Display and Direct Key Setting
Item Appearance
Connection method
Ratings and Specifications
Model NPN output PNP output
Standard models
Pre-wired
E3X-SD11 E3X-SD41
Simple Fiber Amplifier E3X-SD
The Standard for Fiber Amplifiers with Simple Operation and High Performance
■ Operation so simple that essentially anyone can use the amplifier right way.
Straight connector
L-shaped connector
Mounting Brackets Appearance Applicable models Model Quantity
E3X-SD@ E39-L143 1
End Plate Appearance Model Quantity
Light source (wavelength) Red LED (620 nm) Power supply voltage 12 to 24 VDC ±10%,
ripple (p-p): 10% max. Current consumption 960 mW max. (Power supply: 24 V, Current consumption: 40 mA max.)
歐姆龍日本光纖放大器，OMRON光纖放大器材質說明
