YUKEN柱塞泵,EDFHG- 03-100-3C40-XY-E-31
對AR16比A16（32設計）另外，AR16的質量比基本上打火機
特征低噪聲AR16的噪聲水平已經降低了1-2分貝（A）量和全切斷與的比較
的A16安靜的泵。[“AR16”的比較與“A16”]
hydraulic oils.8. Drain Piping2. Control of Contamination
Due caution must be paid to maintaining control over
contamination of the operating oil which can otherwise lead
to breakdowns and shorten the life of the unit. Please
maintain the degree of contamination within NAS Grade
10.The suction port must be equipped with at least a 100 mm
管AR16，AR22 3/8 [內側直徑。 8.5毫米
（0.33英寸）以上]為10 mm（0.39英寸）
2號“AR”系列柱塞泵AR16 / AR22-FR01
1.液壓油使用石油基油如抗磨損型液壓
油或R＆O（銹蝕和氧化抑制劑）型液壓
油相當于ISO VG-32或46的2的粘度范圍是從20到400毫米/秒（98至1800 SSU）
和溫度范圍為0至60℃（32至140°F）， 這兩者必須滿足對使用上述的
液 oils equivalent to ISO VG-32 or 46. The recommended
2 viscosity range is from 20 to 400 mm /s (98 to 1800 SSU)
and temperature range is from 0 to 60°C (32 to 140°F),
both of which have to be satisfied for the use of the above
id
any stress from bending or thrust.
Maximum permissible misalignment is less than 0.1 mm (.
004 inches) TIR and mximum permissible misangular is
上海乾拓貿易有限公司
；
直線；
手機；
企業QQ；2880626084
郵箱；@163.com
；劉夢亞
YUKEN柱塞泵,EDFHG- 03-100-3C40-XY-E-31
